| Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
ON THIS PAGE
|
...
| Code Block | ||
|---|---|---|
| ||
vm = CreateObject("roVideoMode")
sm = vm.GetScreenModes()
sm[0].video_mode="1920x1080x60p"
sm[0].transform = "normal"
sm[0].display_x=0
sm[0].display_y=0
sm[1].video_mode="1920x1080x60p"
sm[1].transform = "normal"
sm[1].display_x=0
sm[1].display_y=1080
sm[0].video_mode ="1920x1080x60p"
sm[1].enabled = true
sm[1].video_mode ="1920x1080x60p"
sm[1].display_x = 0
sm[1].display_y = 1080
vm.SetScreenModes(sm) |
| Note |
|---|
To calculate the size of a screen bezel in pixels from millimeters, you must multiply the screen width/height in pixels by the bezel size in millimeters, then divide by the screen width/height in millimeters. You can add this bezel area to the wall width and height to get the total bezel-adjusted resolution. |
To configure a 1x2 video wall with bezel compensation, enter:
...
Specifies the target video mode of the device the next time it reboots. Once a video mode is specified using SetMode(), it can only be changed by a device reboot.
SetCustomModeline(roString modeline) As roBool
Sets the custom videomode with the supplied modeline (see Applying a Custom Resolution). The custom videomode can then be selected using SetMode.
GetModeForNextBoot() As String
...