| Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
ON THIS PAGE
|
...
If the network_interface is specified as an integer, the interface must currently exist on the player; otherwise, the object-creation function will return Invalid. Conversely, specifying the network_interface as a string allows you to create a roNetworkConfiguration instance for an interface that is not currently present on the player.
The network interface can be configured as a VLAN using the following string format: "[parent_interface].[vlan_id]" (e.g "eth0.42"). Once the VLAN interface(s) are configured, they must be enabled on the parent network interface (e.g. "eth0") using the SetVlanIds() method. VLAN interfaces use DHCP by default. They are supported on Series 4 (XTx44, XDx34, HDx24, LS424) and Series 3 (XTx43, XDx33, HDx23, LS423, HO523) players only.
...
SetWiFiFrequencies(frequencies As String) As Boolean
Sets valid WiFi frequencies to specified range. Supports 2GHz, 5GHz, or list of frequencies written in MHz("2412 2417"). It returns true if the frequency is successfully set.
SetWiFiAccessPointMode(enable as Boolean) As Boolean
...
Sets the name or address of the proxy server used for HTTP and FTP requests. The proxy string should be formatted as "http://user:password@hostname:port". The hostname can contain up to four "*" characters; each "*" character can be used to replace one octet from the current IP address. For example, if the IP address is currently 192.168.1.2, and the proxy is set to "proxy-*-*", then the player will attempt to use a proxy named "proxy-192.168".
The following characters must be percent-encoded for the user name and password:
| SPC | %20 |
| " | %22 |
| # | %23 |
| % | %25 |
| / | %2F |
| < | %3C |
| > | %3E |
| ? | %3F |
| @ | %40 |
| [ | %5B |
| \ | %5C |
| ] | %5D |
| ^ | %5E |
| ` | %60 |
| { | %7B |
| | | %7C |
| } | %7D |
GetProxy() As String (host)
...