Versions Compared

Version Old Version 33 New Version 34
Changes made by

BrightSign TechDocs

BrightSign TechDocs

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleExpand

BrightSign players do not support videos that have a width or height less than 64 pixels. However, a video can be scaled down beyond this limit by making the BrightAuthor:connected or BrightAuthor zone or HTML <video> element containing the video smaller than 64x64. To get the desired downscaling behavior, ensure that the View Mode of the zone is not set to Fill Screen and Centered, or that the <video> element does not have an object-fit=cover attribute. 

What input types are supported in BAconnected and BrightAuthor? (IR, Serial, etc..)

Expand
titleExpand

BrightAuthor:connected and BrightAuthor accept input from any of these devices:

  • Touchscreens equipped with a supported touch controller. See this FAQ for a list of supported touch controllers. (XC2055, XC4055, XT1145, XT1144, XT1143, 4K1042, 4K1142, XD1035, XD235, XD1034, XD1033, XD1032, XD1132, XD1030, XD1230, HD1025, HD1023, HD1022, HD1020, LS425, LS445, LS423, LS422)

  • BrightSign’s BP200 and BP900 USB button panels (XC2055, XC4055, XT1145, XT1144, XT1143, 4K1042, 4K1142, XD1035, XD235, XD1034, XD1033, XD1032, XD1132, XD1030, XD1230, HD1025, HD1023, HD1022, HD1020, LS425, LS445, LS423, LS422)

  • Many brands of USB Keyboards (XC2055, XC4055, XT1145, XT1144, XT1143, 4K1042, 4K1142, XD1035, XD235, XD1034, XD1033, XD1032, XD1132, XD1030, XD1230, HD1025, HD1023, HD1022, HD1020, LS423, LS422)

  • Many brands of USB Mouse or Trackball (XC2055, XC4055, XT1145, XT1144, XT1143, 4K1042, 4K1142, XD1035, XD235, XD1034, XD1033, XD1032, XD1132, XD1030, XD1230, HD1025, HD1023, HD1022, HD1020, LS425, LS445, LS423, LS422)

  • Many brands of USB Bar Code Scanners (XC2055, XC4055, XT1145, XT1144, XT1143, 4K1042, 4K1142, XD1035, XD235, XD1034, XD1033, XD1032, XD1132, XD1030, XD1230, HD1025, HD1023, HD1022, HD1020, LS425, LS445, LS423, LS422)

  • Quadravox Serial Button Board

  • MX, Crestron, and similar control devices

  • Any GPIO (open/close contact switch) button, signal, or LED (your custom board or LED display)

  • PC (via UDP or serial)

  • IR input/output devices using the NEC or Pronto Hex remote control protocols (all XT, 4K, and XD models, as well as the HD1023, LS423, HD1022, HD1020, HD810, HD1010, HD1010w).  To accept IR input, you must use a 3.5mm IR transceiver or a USB IR transceiver from Igunaworks.