Content Comparison

...

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [unsigned short] count: The default value is 10.
• [unsigned long] interval: Value  The interval value in milliseconds. The default is 100.
• [unsigned long] timeout: The timeout value in seconds. The default is 10000.
• [unsigned long] packetsize:  // Packet size in bytes, . The default is 56.
• [bool] ipv4: Enable pinging IPv6 addresses. The default is true.
• [bool] ipv6: Enable pinging IPv6 addresses. The default isfalse.
• [bool] allAddresses: If true then ping all addresses returned from the DNS query. If false, if false then each will be pinged in turn until one responds. The default is false.

...

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [string] hostname: The host name or literal address pinged.
• [PingResults] results:

PingResults

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [bool] up: This value is true is true if at least one address responded to at least 50% of the echo requests.
• [Array<ProtocolPingResult>] ipv4:
• [Array<ProtocolPingResult>] ipv6:

...

ProtocolPingResult

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [string] address:  The IP address pinged
• [bool] up: If true if the , the address responded to at least 50% of the echo requests
• [ProtocolPingReport] report:

ProtocolPingReport

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [unsigned short] transmitted: The number of echo requests sent
• [unsigned short] received: The number of echo replies received
• [ProtocolPingStats] stats:

...

This interface is not recommended for use unless you are using BrightSign OS v8.2 or later and is only fully implemented in BrightSign OS v8.3.45 and later.

• [unsigned long] quickest: The quickest reply received
• [unsigned long]  average: The average time across all replies from address
• [unsigned long]  slowest: The slowest reply received.
• [string]  units: The value is always "us" to indicate microseconds

...