Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Overview 

A bezel is the physical frame around the display area of a panel, which usually contains a border of black (inactive) pixels that separate that display area from the display area on adjacent panels. If there is no compensation for the bezel, it can cause alignment issues. Bezel compensation, which discards the display content under the central bezels, should be applied to video walls to ensure that displayed images move smoothly across adjacent panels.

Calculating Bezel Size

To calculate the size of a screen bezel in pixels from millimeters, you must multiply the screen width/height in pixels by the bezel size in millimeters, then divide by the screen width/height in millimeters.

ON THIS PAGE


Example


This example uses a four panel display wall (see Image 1) where the panel dimensions are 1100mm (1920 pixels) by 620mm (1080 pixels), the horizontal bezel is 17mm, and the vertical bezel is 20mm.

To get the number of pixels in the horizontal bezel area, multiply the panel size in pixels by the bezel in millimeters, then divide by the panel size in millimeters: 

(1920p x 17mm) / 1100mm = 30 pixels

To get the number of pixels in the vertical bezel area, multiply the panel size in pixels by the bezel in millimeters, then divide by the panel size in millimeters:

(1080p x 20mm) / 620mm = 35 pixels.

To get the total bezel-adjusted resolution, add the width to the height:

(1920p + 30p + 1920p) + (1080p + 35p + 1080p) = (3870 x 2195 pixels)

Image 1: Add the bezel area to the wall width and height get the total bezel-adjusted resolution.


Configuring a Video Wall with Bezel Compensation

To configure a 1x2 video wall with bezel compensation:

vm = CreateObject("roVideoMode")
sm = vm.GetScreenModes()

sm[0].video_mode = "1920x1080x60p"
sm[0].transform = "normal"
sm[0].display_x = 0
sm[0].display_y = 0
sm[0].enabled = true

sm[1].video_mode = "1920x1080x60p"
sm[1].transform = "normal"
sm[1].display_x = 0
sm[1].display_y = 1100    'Bezel compensation of 20 pixels 
sm[1].enabled = true

sm[2].enabled = "false"
sm[3].enabled = "false"

vm.SetScreenModes(sm)








  • No labels