Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To format or erase your SD card, refer to the following sections based on whether you are on a Windows system, macOS, BrightSign with BSN.cloud, or BrightSign without BSN.cloud:

Windows

  1. Connect your SD card to your computer using an adapter if necessary.

  2. Open File Explorer (aka Windows Explorer) by holding the Windows key and tapping E on the keyboard, or running Explorer from the Start Menu. The SD card should appear as a drive letter in File Explorer

  3. Right-click the drive letter and select Format

  4. Choose exFAT - if using OS/firmware lower than 6.2.94 or using a Series 2 or older player, choose FAT32 (Default) or FAT

  5. Click Start and confirm begin the format.

  6. Once the process has finished, click the Safely Remove Hardware and Eject Media icon and Eject the SD card or right-click the drive letter and select Eject - the available options may vary depending on your hardware, installed software, and version of Windows.

  7. It is now safe to remove the SD card from your computer

mceclip1.pngmceclip4.png

  • No labels