Retrieves information about the specified video output.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
GET /api/v1/video/hdmi/output/0/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json |
Response Body
resolutions resolutions[ ]: An array of information about the graphics, output, video resolution. Returns result values for height and width.
edid_identity: Parses the above string in a JSON format for readability. Requires an HDMI output connected to the player and a display.
edid string: Returns the EDID read string of the display connected to the player. If power save is on, zeroes will be returned
status:
audioBitsPerSample int: The number of bits per audio sample
audioChannelCount int: The number of audio channels in the output
audioFormat string: The format of the audio output. A "PCM" value indicates that the player is sending decoded output.
audioSampleRate int: The audio sample rate (in hertz)
eotf string: The current electro-optical transfer function (EOTF) used by the display. The following are possible values:
"HDR (GAMMA)"
"SDR (GAMMA)"
"SMPTE 2084 (PQ)"
"Future (BBC/NHK)"
"unspecified"
outputPowered bool: A flag indicating whether the display device is on (i.e. RX powered)
outputPresent bool: A flag indicating whether the HDMI output is connected to a display device or not.
unstable bool: A flag indicating whether the display signal is unstable or stable
modes: List of all available video modes on the player.
activeMode: Information about the active video mode on the player
bestMode string: The best video mode for the player. The HDMI connector must be attached because it gets details from EDID result.
configuredMode: The configured video mode on the player. This can be different than activeMode.
powerSaveStatus bool: This value indicates the power save status of the display connected to the player.
Response Example
|
Returns the EDID information from a compatible monitor/television connected to the video output.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
GET /api/v1/video/hdmi/output/0/edid/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json |
Response Example
result is the EDID string result
{
"data": {
"result": "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"
}
} |
Retrieves the power status of the monitor connected to the player.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
GET /api/v1/video/hdmi/output/0/power-save/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json |
Response Body
is_connected bool: A flag indicating whether the monitor is connected to the HDMI output on the player
is_powered bool: A flag indicating whether the monitor is on (for example, RX powered)
enabled bool: A flag indicating whether power-save mode has been enabled on the HDMI/VGA output
Response Example
{
"data": {
"result": {
"is_connected": true,
"is_powered": true,
"enabled": false
}
}
} |
Enables or disables power-save mode on the monitor connected to the player.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
PUT /api/v1/video/hdmi/output/0/power-save/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json
Content-Type: application/json
Content-Length: 51 |
This is an example request body that enables the power-save mode:
{
"enabled": true
} |
Response Example
{
"data": {
"result": true
}
} |
Returns a list of all available video modes on the specified video output.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
GET /api/v1/video/hdmi/output/0/modes/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json |
Response Body
Returns an array of video mode objects, each of which contain the following parameters:
modeName string: The mode (for example, “1920x1080x60p”)
colorDepth string: The color depth of the video signal
colorSpace string: The color space of the video signal (“rgb”, "yuv420", or "yuv422")
dropFrame bool: Whether or not the video timecode uses drop frame
frequency int: The frame rate of the video output
width int: The width of the video output
height int: The height of the video output
graphicsPlaneWidth int: The width of the graphics plane
graphicsPlaneHeight int: The height of the graphics plane
interlaced bool: Whether or not the video output is interlaced
overscan bool: Whether or not the video output is using an overscan setting or not
preferred bool: Whether or not video is the preferred mode
Response Example
|
Retrieves the current video mode on the specified video output.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Query String Parameters
Each of these parameters delivers a different mode value:
best int optional: If set to 1, this returns the best mode
active int optional: If set to 1, this returns the active mode
configured int optional: If set to 1, this returns the configured mode
Request Example
The example request parameters and headers are set as follows:
:connector is set to hdmi
:device is set to 0
best is set to 1
GET /api/v1/video/hdmi/output/0/mode/?best=1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json |
Response Body
isAutoMode bool: Whether the mode is set to “auto”
name string: The name of the video mode. Same as mode.modeName below.
width string: The width value of the video mode.
height string: The height value of the video mode.
frames string: The frame rate value of the video mode.
scan string: The scan character value of the video mode.
mode object: The currently configured video mode on the video output with following parameters -
modeName string: The mode (for example, “1920x1080x60p”)
colorDepth string: The color depth of the video signal
colorSpace string: The color space of the video signal ("rgb", "yuv420", or "yuv422")
dropFrame bool: Whether or not the video timecode uses drop frame
frequency int: The frame rate of the video output
width int: The width of the video output
height int: The height of the video output
graphicsPlaneWidth int: The width of the graphics plane
graphicsPlaneHeight int: The height of the graphics plane
interlaced bool: Whether or not the video output is interlaced
overscan bool: Whether or not the video output is using an overscan setting or not
preferred bool: Whether or not video is the preferred mode
Response Example
{
"data": {
"result": {
"isAutoMode": false,
"name": "1920x1080x60p",
"width": "1920",
"height": "1080",
"frames": "60",
"scan": "p",
"mode": {
"colorDepth": "8bit",
"colorSpace": "rgb",
"dropFrame": false,
"frequency": 60,
"graphicsPlaneHeight": 1080,
"graphicsPlaneWidth": 1920,
"height": 1080,
"interlaced": false,
"modeName": "1920x1080x60p",
"overscan": true,
"preferred": false,
"width": 1920
}
}
}
} |
Changes the video mode on the player. You should first send a GET request to find the body parameters of this API, but only the modeName parameter is required.
Segments
connector: The current value is always hdmi
device: This value is 0 for single-output Series 5 players and all Series 4 and older players. The value can be 0-3 for the XC4055, which has multiple outputs, and 0 or 1 for the XC2055 and XT2145.
Request Body
A video mode object containing the following value(s):
modeName string required: The mode (for example, “1920x1080x60p”). See Supported Video Modes for a list of the possible valid strings for your player
colorDepth string optional: The color depth of the video signal
colorSpace string optional: The color space of the video signal (“rgb”, "yuv420", or "yuv422")
dropFrame bool optional: Whether or not the video timecode uses drop frame
frequency int optional: The frame rate of the video output
width int optional: The width of the video output
height int optional: The height of the video output
graphicsPlaneWidth int optional: The width of the graphics plane
graphicsPlaneHeight int optional: The height of the graphics plane
interlaced bool optional: Whether or not the video output is interlaced
overscan bool optional: Whether or not the video output is using an overscan setting or not
preferred bool optional: Whether or not video is the preferred mode
Request Example
PUT /api/v1/video/hdmi/output/0/mode/ HTTP/1.1
Host: {{playerIP}}
Authorization: {{DigestAuth}}
Accept: application/json
Content-Type: application/json
Content-Length: 95 |
This is the example request body:
{
"name": {
"modeName": "640x480x60p"
}
} |
Response Body
The server will return a success or error message. A successful response will almost always cause a reboot which will be indicated in the response.
successbool: Whether or not the operation was successful
rebootbool: Whether or not the player is rebooting
Response Example
{
"data": {
"result": {
"success": true,
"reboot": true
}
}
} |