/
WD105 WiFi/Bluetooth Module Installation (Series 5)

WD105 WiFi/Bluetooth Module Installation (Series 5)

The WD105 runs on all Series 5 players except the AU5. The BrightSignOS version should be 9.0.15 or higher.

You will need the following tools for installation: 

  • Phillips screwdriver with a PH2/PZ2 tip (PH2 is the US standard, PZ2 is the international standard)

  • Phillips screwdriver with a PH1/PZ1 tip (PH2 is the US standard, PZ2 is the international standard)

  • 8-inch (200mm) length tweezer with a serrated tip (or precision mini needle-nose pliers)

XC5 Installation Instructions

 

XD5 Installation Instructions

XT5 Installation Instructions

 

HD5 Installation Instructions

 

LS5 Installation Instructions

 

 

Related content

WD105 Hardware Specs
WD105 Hardware Specs
Read with this
WD104 WiFi/Bluetooth Module Installation (Series 3 and 4)
WD104 WiFi/Bluetooth Module Installation (Series 3 and 4)
More like this
HD5 Hardware Interfaces
HD5 Hardware Interfaces
Read with this
Hardware
More like this
XD5 Hardware Interfaces
XD5 Hardware Interfaces
Read with this
SSD Installation (XCx55, XDx35)
SSD Installation (XCx55, XDx35)
More like this