BP900/BP200 Event

Owned by BrightSign TechDocs
Last updated: Sept 20, 2024
2 min read

 

 

The BP900 and BP200 events trigger when a BP900 or BP200 button is pressed. The BP900 and BP200 button panels are LED-based touch devices that allow you to add button interactivity to BrightSign players with a USB port. 

Enumeration

There are a total of eight event icons: BP900A, BP900B, BP900C, BP900D, along with BP200A, BP200B, BP200C, and BP200D. The letters A, B, C, and D correspond to USB ports. If the event you are defining is for a button pad connected to USB port A, use "A". If it is for a button pad connected to the second port, use B.

Example

An XD1134 has two available USB ports. If you want to connect two button boards, a BP900 to port A and a BP200 to port B, you would use the BP900A and BP200B icons to define events for each.

You can use a USB hub to connect up to four BP900/BP200 button panels to a BrightSign player. See this tech note to learn more about BP900/BP200 enumeration on USB hubs.

Event Properties

  • Specify Button Number: Select a button on the button pad that you want the user to press to transition to the next state.

Selecting Any Button will enable only the button numbers used in other BP200 or BP900 events in the presentation (or numbers enabled in the Presentation Settings > Interactive > Touch section): For example, if you have defined BP900 events for buttons 1 and 4, a BP900 event set to Any Button will trigger for buttons 1 and 4 only.

  • Press (First Touch): The event triggers once at the moment the button is pressed.

  • Press Continuous: The event triggers the moment the button is depressed, then continues triggering at the specified Repeat interval in milliseconds as long as the button is depressed.