/
Determine the IP Address of a Player

Determine the IP Address of a Player

In BrightAuthor:connected

The BrightAuthor:connected Network tab lets you select player information to display (including IP Address and Local IP) through the three gear icon:

Screenshot 2024-06-26 at 3.49.18 PM.png

In BrightAuthor

If you have enabled the Diagnostic Web Server (DWS), the IP address will be listed in the Info tab.

Hardware Display

If you power up the unit without an SD card, the IP address should appear on the connected display after a few moments.

Router

If you have access to the network router, you can log in and see which IP address is assigned to the entry with the player's MAC address. The MAC address of the player is located on the bottom of the player; it is also displayed when you power up the unit without an SD card.

Related content

Decide Whether to Trade in a Player
Decide Whether to Trade in a Player
Read with this
Set up the Local Diagnostic Web Server
Set up the Local Diagnostic Web Server
More like this
Send a Serial Command on Receiving a UDP Message
Send a Serial Command on Receiving a UDP Message
Read with this
Using the Diagnostic and Local Web Servers
Using the Diagnostic and Local Web Servers
More like this
Quickly Set Up my Player for Local Networking
Quickly Set Up my Player for Local Networking
More like this
Perform a Network Test on a Player
Perform a Network Test on a Player
More like this