Use BrightSign Players with LED Videowalls in BrightAuthor

To get a LED wall or walls working with BrightSign players, send a standard resolution that is greater than the pixel resolution of the wall, and common to both the player and the LED Wall processor. Then use the BrightAuthor canvas tool to match the pixel resolution. The Least Common Resolution is the lowest resolution that both the LED Wall Processor can accept as a input, and the lowest resolution the player can output, that is greater than the resolution of the physical LED pixels connected to the LED Wall processor. 

For example, if you have a LED Wall Processor that accepts 3840x2160 using the HDMI input of the LED Wall Processor, and has a LED physical pixel layout of 2560x960:

1. From the player, send 3840x2160 to the LED Wall Processor.

2. Use the Layout tab in BrightAuthor to shrink the zone where your content will play to 2560x960.

3. Set the player to Force Resolution and Use Graphics Plane when creating a new project to get the 3840x2160 layout canvas.

The layout tab of your BrightSign Player would look something like this, where the zone pixels would be the size of your LED walls:

Open

​