XDx30 Environmental and Power Usage

BrightSign XD players are designed to be used between 0°C and 40°C, at 90% maximum relative humidity, non-condensing.

The power supply on the BrightSign XD series is 36W and 12V at 3A. These players will use approximately 1A of power when playing a 720p or 1080i MPEG2 HD source file.

An additional 2A of power is available for peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A draw. If more than 2A is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.

The 2A can be shared in any way among the following connectors:

Connector

Maximum Power Usage

Ethernet

Approx. 180mA (when transferring data)

USB

500mA (on each connector)

DE-9 5V*

500mA

DA15 3.3V

500mA

HDMI® 5V

500mA

IR blaster output

300mA

*DE-9 is more commonly referred to as DB-9

Â