BrightAuthor:connected Requirements

To create presentations and publish them to your player, you will need the following:

Mac or PC

Mac

Any Mac computer running one of the last two major production releases of the macOS.

Windows PC

Any Windows PC that meets or exceeds the following minimum requirements:

  • 2.3 GHz CPU
  • 2 GB RAM required (4 GB recommended)
  • 100 MB available hard disk space for program files (additional disk space required if storing content and/or presentations on your hard disk)
  • One of the following operating systems:
    • Windows 7 (32 or 64 bit)
    • Windows 8 (32 or 64 bit)
    • Windows 10 (32 or 64 bit)

The following are recommended components:

  • Bonjour 3.x or later: Required for automatically discovering players on the local network; available with the Airport Utility installer.

Chrome Browser

If you are using the browser version of BrightAuthor:connected, we recommend accessing it with the Chrome browser for full feature support. Your Chrome version should be within five major releases of the current production release (e.g. Chrome 75 through 70).

ON THIS PAGE


BrightSign Player

Any of the following models (must be running OS 8.0 or later):

  • Series 4: XTx44, XDx34, HDx24, LS424, HS124
  • Series 3: XTx43, XDx33, HDx23, LS423, HS123, HO523
  • Series 2: 4Kx42 only

Display

A monitor, TV, or touchscreen with an HDMI® input

Storage Device

Any of the following:

  • microSD card (for XTx44/43, XDx34/33, HDx23/24, LS424/423 models) or SD card (for earlier models)
  • USB Flash Drive (supported on models with a USB port)
  • M.2 SSD (XTx44, XTx43, XDx34, XDx33 models only)
  • mSATA drive (4Kx42 models only)

Note

We recommend formatting your storage device using FAT32 or exFAT. The exFAT format allows you to store files larger than 4GB (but is not supported by 4Kx42 models). The NTFS format also allows for files larger than 4GB, but the player will not be able to receive network updates or generate logs.

Card Reader/Writer

Only required if publishing setup files and/or presentations to an SD or microSD card. The card reader/writer must be connected to your Mac/PC and must be compatible with your storage card.

Input Device

Important

BrightAuthor:connected does not currently support IR events through the IR port. However, it does support the use of IR USB devices (e.g. Iguanaworks USB transceiver). 

Required for interactive presentations only. Depending on the model, BrightSign players support the following input devices:

  • Touchscreen equipped with a supported touch controller. See this link for a list of many supported touch controllers. 
  • BrightSign BP200 and BP900 USB button panels 
  • Many brands of USB keyboards 
  • Many brands of USB mice or trackballs 
  • Many brands of USB bar code scanners
  • Quadravox Serial Button Board
  • AMX, Crestron, and similar control devices
  • Any GPIO (open/close contact switch) button, signal, or LED (your custom board or LED display); GPIO connections may require Phoenix-type GPIO terminal blocks.
  • PC (via UDP or serial)
  • IR input/output devices using the NEC or Pronto Hex remote control protocols

Note

The LS424/423 models have a USB-C port, while many of the above USB devices (including the BP200/BP900) ship with USB-A connectors. BrightSign sells a USB-A to USB-C adapter for this purpose.