Page Comparison

To create a new BrightWall presentation, navigate to Create > BrightWall™ (if the Create a new Video Wall window doesn’t open automatically, click File > New BrightWall™). A BrightWall presentation requires a BrightWall Configuration file to set the platform, dimensions, and layout of the video wall. Once you create a BrightWall Configuration file, you can use that file to quickly generate BrightWall presentations with the same video-wall setup.

• Save As: Enter the name of the new BrightWall project.

• Where: Choose where to save the BrightWall project file. Note that the project file is different from the presentation files that will actually be published to the players.

• Configuration file: If you have created a BrightWall Configuration file, you can use it to generate settings for the BrightWall project.

• Create BrightWall Configuration: Click this button to create a new BrightWall Configuration file. Use this option if you haven’t created a BrightWall Configuration file yet, or if you would like to create an additional BrightWall Configuration file with new settings.

...

• BrightSign Model: Choose the BrightSign player model that will display the video wall. All players that are part of the video wall must be of the same model type.

• Connector type: Choose the connector (HDMI, VGA, Component) that each player will use to connect to its display. All players that are part of a video wall must use the same connector.

• Screen resolution: Choose the resolution of each screen in the video wall. All video wall screens must have the same resolution. You can view all available screen resolutions in this FAQpage.

• Monitor orientation: Choose one of the following:

  • Landscape: Content is not rotated.

  • Portrait – bottom on left: Video is rotated counter-clockwise 90 degrees. Select this option if the bottom of each monitor is on the left when it is portrait oriented. Note that portrait modes apply to Stretched BrightWall presentations only.

  • Portrait – bottom on right: Video is rotated clockwise 90 degrees. Select this option if the bottom of the each monitor is on the right when it is portrait oriented. 

    Note

    title	Note

    The

     Note that portrait modes apply to Stretched BrightWall presentations only

    . If you select a portrait mode, you will be limited to creating Stretched presentations with this BrightWall Configuration file

    .

    

• Monitor overscan: Select an overscan setting to determine how each video fills the display screen.

  • No overscan – use full screen: Displays video to the edge of the video signal.

  • Overscan – action safe: Restricts the image display to an area that is compatible with most displays.

  • Overscan – title safe: Restricts the image display to an area that is much smaller than the image generated by the video signal.

• Number of rows: Specify the vertical length of the video wall (in number of screens).

• Number of columns: Specify the horizontal length of the video wall (in number of screens).

• Anchor
  domain domain

  Domain: Specify a domain number (between 0 and 127) for the video wall. This number must be unique for each video wall on the local network. This will ensure that multiple video walls can run on the same local network without synchronization messages interfering with each other.

• Bezel Width and Height: Account for the bezel size of the monitors that make up the video wall. This allows for better alignment of videos in the video wall. These measurements only apply to Stretched BrightWall presentations. For Regular presentations, bezel width and height will need to be accounted for in the content creation application. 

  Anchor
  bezelmeasurement bezelmeasurement

• By percentage: Enter the bezel width and height as percentages. Use the following calculation to determine bezel percentages:

  • Width: The width of the bezel between active screens (i.e. the total of both left and right bezels) divided by the width of an active screen. The result is multiplied by 100. For example, a video wall made up of screens with a width of 42 inches and a 1 inch bezel on each side would be calculated as follows: (2”/42”)*100=5%

  • Height: The height of the bezel between active screens (i.e. the total of both top and bottom bezels) divided by the height of an active screen. The result is multiplied by 100. For example, a video wall made up of screens with a height of 23.625 inches and a 1 inch bezel on each side would be calculated as follows: (2”/23.625”)*100=8%

    Note
    title Note
    Bezel width and height percentages must be specified as integers (i.e. whole numbers that are positive).

• By measurement: Enter the bezel width, bezel height, screen width, and screen height in millimeters (mm). BrightAuthor will make the calculations automatically.

• Save As: Click this button to save the BrightWall Configuration file. It will then be used as the Configuration File for the BrightWall presentation.

...