Content Comparison

...

DWS Access must be turned on in the Control tab of the Remote DWS to access the Local DWS.

Follow these steps to To access the Local DWS using a web browser on the local network:

1. You will need the IP address of the player. It can be accessed :

   1. Get the address through the Remote DWS by selecting that category the Player List gear icon, in the Info tab of the

   Remote DWS

   1. RDWS, or under Network Settings for the selected player.

   2. If you don’t have access to the Remote DWS, you can get the IP address by:

      1. Power off the player by unplugging the power supply.

      2. Remove the SD card (as well as any internal storage devices, if applicable).

      3. Power on the BrightSign player by reconnecting the power supply.

      4. Wait for the player to boot up: The IP address of the player will be displayed on the screen.

2. Enter the IP address of the networked player into the address bar of a web browser:

   1. If you've set up the DWS with a password, enter the password. The username is always "admin".

   2. If you haven't previously configured the DWS, use the serial number of the player as the password.

...