This section describes how specific components operate on the LS425 and LS445.
On-Board LED
The single on-board LED flashes using the same codes as the red status (Err) LED described below. The LED will also acts as a power-on light (similar to the green LED on other players) and will illuminate when power is applied to the player and will remain in a solid state. The LED will flash to indicate an error as described in the chart below, or flash during the firmware update process and (it will cease flashing when the update is complete).
LEDNumber of flashes | Indication | Red status (Err) | Flashes a certain number of times to indicate which error is occurring. The flash codes are described belowCode | |
|---|---|---|---|---|
The light will remain illuminated if power is on unless one of the following errors is present, or unless a firmware update is happening. | ||||
2 | Unspecified error | |||
3 | Network recovery script is preparing to run on a device configured for network recovery. | |||
4 | No upgrade file found | |||
5 | Failed to load kernel module | |||
6 | Board is not capable of running the current firmware version | |||
7 | A piece of on-board hardware is not working correctly. | |||
8 | Problem related to the storage device (either the USB drive or microSD card) | |||
9 | Problem related to the registry/NAND | |||
10 | The autorun script encountered a load/run error. | |||
11 | WiFi-related error | |||
12 | Unable to find a bootable image | |||
...