The XC4055 and XC2055 are designed for sustained ambient temperatures between 0°C and 40°C
...
. Non-operational (transportation or storage) temperatures can range from -20°C to 85°C. Units should be allowed time to acclimate before being powered up.
Operating the players above 40°C ambient for prolonged periods may reduce the operational life of the product and result in intermittent resetting of the device.
| Warning |
|---|
ImportantExposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure. Damage due to such internal condensation is not covered by warranty. If a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power. |
Power Adaptor
The XC4055 and XC2055 is supplied with a 90W (19V@4.7A) power adaptor
...
. The device will use approximately:
18W of power when playing a 3840x2160x60p H.265 (HEVC) source file.
...
27W of power when playing a (8K) 7680x4320x60p H.265 (HEVC) source file.
3V3 power is available on the m.2 expansion ports for peripherals (Wi-Fi module, SSD module) the power to each port it not restricted but the combined power consumption should not exceed 3.5A.
If more than 3.5Amps is drawn the power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
Ports Supplying Power
Connector | Maximum Power Usage |
|---|---|
RJ-45 | 180mA (when transferring data) |
USB 2.0 (Type C) |
...
500mA, 900mA, and 1.5A |
...
modes | |
USB 2.0 (Type A) | 5V @ 1.5A |
GPIO Port | 3.3V @ 1.0A |
HDMI® Ports | 5V @ |
...
300mA per port |
...
. Ports are protected above 400mA | |
IR Blaster (output) | 3V3 @ 85mA (current limited with 39R) |
M.2 Wi-Fi Module | 3V3 |
...
The combined power of these expansion ports should not exceed 3.5A |
M.2 SSD Module |
...