| Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
ON THIS PAGE
|
This section describes the characteristics and operation of all connectors on the LS423.
Power Connector
The power connector for the LS423 is a USB Micro-B port rated for 5V@2A. The connector is used for power input only—it does not transfer data.
RJ45 LAN
The LS423 has an RJ45 connector for 100BASE-TX networking. The maximum length for Cat 5E cable is 100 meters; the allowed length can be higher or lower depending on the quality of the cable.
USB
The LS423 has a USB 2.0 Type-C port, which is capable of transfer speeds up to 480 Mbit/s.
The USB connector can supply up to 500mA of power for peripherals. The maximum length for a USB cable is 5 meters.
...
The following table illustrates the pinout of the USB 2.0 Type-C host port:
pin | Signal Name | Description | Mating Sequence | pin | Signal Name | Description | Mating Sequence |
|---|---|---|---|---|---|---|---|
A1 | GND | Ground return | First | B12 | GND | Ground return | First |
A2 |
B11 |
A3 |
B10 |
A4 | VBUS | Bus power | First | B9 | VBUS | Bus power | First |
A5 | CC1 | Configuration channel | Second | B8 |
A6 | Dp1 | Positive half of USB 2.0 differential pair – position 1 | Second | B7 | Dn2 | Negative half of USB 2.0 differential pair – position 2 | Second |
A7 | Dn1 | Negative half of USB 2.0 differential pair – position 1 | Second | B6 | Dp2 | Positive half of USB 2.0 differential pair – position 2 | Second |
A8 |
B5 | CC2 | Configuration channel | Second | ||||
A9 | VBUS | Bus power | First | B4 | VBUS | Bus power | First |
A10 |
B3 |
A11 |
B2 |
A12 | GND | Ground return | First | B1 | GND | Ground return | First |
HDMI Output
The HDMI-out connector is ® output is an HDMI 1.4a connector used to send digital video and audio to HDMI-enabled sink devices. This connector is compatible with HDMI 2.0 devices, It is capable of outputting a maximum video resolution of 1920x1080x60p.
The following table illustrates the pinout of the HDMI connector:
pin | Description | pin | Description |
|---|---|---|---|
1 | TX2p | 2 | Ground |
3 | TX2n | 4 | TX1p |
5 | Ground | 6 | TX1n |
7 | TX0p | 8 | Ground |
9 | TX0n | 10 | TXCp |
11 | Ground | 12 | TXCn |
13 | CEC | 14 | NC |
15 | DDC SCL | 16 | DDC SDA |
17 | Ground | 18 | +5V DDC |
19 | HPD (Hot Plug Detect) | -- |