Versions Compared

Old Version 25

changes.mady.by.user BrightSign TechDocs

Saved on

compared with

New Version Current

changes.mady.by.user BrightSign TechDocs

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleExpand

Try the following:

  1. Update your graphics card driver to the latest version.

  2. Try removing all files from the BrightAuthor Media Library folder. Then open BrightAuthor again. If it opens, this would indicate a codec problem when BrightAuthor tries to build thumbnails for the Media Library. 

  3. If the files used in the project are stored on a networked drive or external drive, try opening them from a location on your local disk. 

  4. Update to the latest version of BrightAuthor, which can be found on the Software Downloads page.

If these suggestions don’t work, post a description of the problem in the forums or email us at support@brightsign.biz and include:

Why

...

can’t I find a certain state, event, or command in BrightAuthor?

Expand
titleExpand

The thumbnails are generated by codecs installed on your computer. You can download codecs to resolve the problem. For example, if you’re missing thumbnails for your transport streams, you can try downloading a codec such as K-Lite.

Why doesn’t cross-fade work in Enhanced Audio Zones?

Expand
titleExpand

Each audio file in the playlist must have the same audio sampling rate if you want to cross-fade between audio tracks in an Enhanced Audio zone. If audio tracks have different sampling rates (for example, 44kHz vs. 48kHz), the player will cut between tracks instead of fading between them.

Why don’t my files show up in the Media Library?

Expand
titleExpand

  • If you add content to your Media Library folder when BrightAuthor is open, it doesn't automatically refresh. You need to click on Refresh in the top right to update the library.

  • Only files with recognized extensions appear in the Media Library. These extensions are supported:

    • Audio files: .mp3, .wav, .ac3 (pass through only)

    • Image files: .jpg, .png, .bmp

    • Video files: .mpg, .vob, .ts, .mov, .mkv, .mp4, .m2ts, .wmv

    • Text files: .txt

  • If you select a zone in your project that only plays certain types of media (like an Video Only zone) only supported media types will be displayed.

  • Text files will only show in BrightAuthor if you have a Ticker zone selected and you click the Text tab under Media Library. If you are having difficulty changing the file extension type to .txt,  make sure “Hide file extensions for known file types” is not turned on in Windows. See this third-party doc for guidance.

How do I set a transition for MRSS image feeds?

Expand
titleExpand

As of BrightAuthor version 4.6.0.35, you can set the transition type and duration through the Image List panel:

Screenshot 2024-06-10 at 3.09.52 PM.pngImage Removed

Why isn’t Remote Snapshot working on BSN?

Expand
titleExpand

To use Remote Snapshot, the Enable Remote Snapshot box must be checked during the setup process and the player must be running a presentation created in BrightAuthor 4.1.1.14 or later. To update the presentation in the group, either:

  • Recreate the presentation in BrightAuthor 4.1.1.14 or later

  • Export the presentation (File > Export <presentation name>) into BrightAuthor after you have upgraded it to a newer version.

  • Update the autorun of the BSN group. This solution may cause unexpected changes, so test it before attempting it on players in the field. To do this:

    1. In BrightAuthor, log in to your BSN account.

    2. Go to Tools > Advanced

    3. Select the Update Autorun tab

    4. Check the boxes next to the group(s) that should use Remote Snapshot.

    5. Select Update now.

BrightAuthor states, events, and commands are made available according to the capabilities of the BrightSignplayer model you select in the NewProject window: For example, since the HD223 does not have an HDMI input or serial port, an HD223 project will not offer the corresponding Live Video state or Serial Input event.

If you don't see an event or state, check the top left of the window to determine whether the presentation is targeted for the correct model, as shown in the image below. If the model number is incorrect, you will need to create another presentation with the correct model number (i.e. the model number of an existing presentation cannot be altered).

Screenshot 2024-08-27 at 8.24.00 AM.pngImage Added

These BrightAuthor states/events are commonly restricted by model type:

  • HTML5: Not supported on LSx22, HDx20, HDx10

  • Live Video: Supported on XT1143, 4K1142, XD1132, XD1230 only

  • GPIO Input

  • Serial Input

Why isn’t the player clock working?

Expand
titleExpand

BrightAuthor configures networked players to synchronize their internal clocks with the BrightSign time server (http://time.brightsignnetwork.com). During setup, players can also be configured to connect to any HTTP server to retrieve the time. This synchronization process is carried out using the HTTP Time Protocol (HTP).

Problems can occur if a home or small office router is being used as a switch and DHCP server, and not to provide Internet connectivity. Routers that are configured in this manner will likely have incorrect time settings because they cannot determine the correct time without an Internet connection. Routers built for enterprise operations will likely not be affected by this issue.

When routers do not have upstream connectivity, they often provide an error, configuration, or diagnostics page to any device that makes an HTTP request. A player attempting to retrieve the time from the remote server will instead retrieve the time from the router redirect page, which will have the incorrect time. This can cause a number of problems with schedules, events, and clock/date displays. Severe problems can occur if the router causes time to move backward on the internal player clock.

If you cannot change the switch/DHCP configuration of the local network, disable the time server requests using the player configuration process in BrightAuthor:

  1. Navigate to Tools > Setup BrightSign Unit.

  2. Locate the Time server field under Network Properties.

  3. Remove the URL entered in the Time server field so that it is blank.

  4. Specify other player settings in the BrightSign Unit Setup window as desired.

  5. Click Create Setup Files to publish the files to an SD card. You can then setup the player using the card.

The issue described above may also occur with some router models when they lose Internet connectivity, even if they are being used in a standard way and not as a network switch. You can prevent this issue by configuring the player to make NTP or HTTPS requests.

Why did my dynamic playlist upload fail?

Expand
titleExpand

Dynamic Playlists support a maximum of 500 content files, so ensure that it has fewer than 500 files before uploading it to BSN. If you need dynamic playback of more than 500 files, create two or more Dynamic Playlists to hold the content.

Why am I getting "Assertion...Failed" errors when using BrightAuthor?

Expand
titleExpand

This type of error can be caused by proxy server or firewall blocking BrightAuthor's access to the Internet. Even if you aren't using a BrightSign Network account, BrightAuthor contacts BSN servers to get the latest firmware versions for public and beta releases. See this page for more information.

Try to duplicate the problem, then exit BrightAuthor if it is open. Find the eventlog.txt file (see this FAQ for more infothe “Where is the BrightAuthor eventlog?” FAQ, above) and forward it to support@brightsign.biz with a description of the problem.

Why do my files not show up on my Media RSS feed in BrightAuthor?

expand

titleExpand

There should be no spaces in the filename of the content you upload to a Media RSS feed. Dashes, underscores, and/or camelCase can be used instead. For example, instead of Your File Name Here.jpg, use any of:

  • YourFileNameHere.jpg            

  • Your-File-Name-Here.jpg

  • Your_File_Name_Here.jpg

How can I fix a “The given key was not present in the dictionary” error?

Expand
titleExpand

The “KeyNotFoundException: The given key was not present in the dictionary” error can be caused by a corrupted UserPreferences.xml file, for example, an empty language setting or a missing localization language entry. Try uninstalling and re-installing BrightAuthor to fix this problem.

Why is my presentation “Unable to open” on one computer, but opens on another?

Expand
titleExpand

BrightAuthor presentation files (.bpf files) created on one computer may fail to open on another computer due to the language that the operating system is set to. Verify the operating systems on both computers are set to the same language, change the language to English temporarily, then try to open the presentation file in BrightAuthor. For example:

Action

You attempt to cast a numeric string to a numeric data type, using code similar to the following:

Code Block
Dim strInput As String = "10"
Dim intResult As Integer = 0
Try
  intResult = Convert.ToInt16(strInput)
  Catch ex As Exception
  MessageBox.Show("Error: " & ex.Message)
End Try

Result

You receive a System.FormatException with "Input string was not in a correct format" and this stack trace:

Code Block
A first chance exception of type 'System.FormatException' occurred in mscorlib.dll
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
at System.Int16.Parse(String s, NumberStyles style, NumberFormatInfo info)
at System.Convert.ToInt16(String value)
at TypeConversionTest.Form1.cmdConvert_Click(Object sender, EventArgs e) in C:\Source\TypeConversionTest\TypeConversionTest\Form1.vb:line 7

Cause

There is an incorrect value in the following value in the Windows registry:

HKEY_CURRENT_USER\Control Panel\International\sPositiveSign

This value should be empty for most English Language settings. Note that when this error occurs, the value may appear empty visually, but may contain a space or unprintable character.

Resolution

While it is possible to directly edit the value for the problem key, the preferred method is to change the Regional Settings to a different Region/Language and then reset it to the desired setting:

  1. Open the Regional and Language Options applet from the Control Panel.

  2. Note the Current Format.

  3. Change the Current Format to "English (Australian)".

  4. Click Apply.

  5. Change the Current Format to the desired format (for example, "English (American)").

  6. Click Apply and then click OK.

This action resets every value under the HKEY_CURRENT_USER\Control Panel\International registry key.

How can I troubleshoot my BrightAuthor Local File Network setup?

Expand
titleExpand

  • By default, BrightAuthor uses Bonjour to automatically discover BrightSign players on the local network. If either Bonjour or BrightAuthor is blocked by your firewall software, then discovery won’t work. Bonjour is sometimes listed as "mdnsResponder" and uses UDP port 5353. It's also possible this is just a temporary issue; the list often takes a few seconds to refresh after after you select the Publish > Local File Network or Manage > Local Network tabs.

  • If BrightAuthor has Bonjour enabled (which it is by default), ensure the Bonjour service is running in Services.

  • Update Bonjour.  If it's already installed, uninstall it and reboot, then reinstall it.
    The Apple AirPort Utility includes Bonjour.  You can uninstall Apple Software Update and the AirPort applications after it completes installing, just leave Bonjour.
    https://support.apple.com/downloads/air%2520port%2520utility%2520windows

  • Verify that you are using the latest version of BrightAuthor software and OS for your player (see the Downloads page).

  • Verify that the SD card is inserted into the player and has not been manually edited since Device Setup. There is a program installed on the card during player setup that listens to publish requests from BrightAuthor.

    • If you run setup, then remove the SD card and publish a local presentation to it, you won't be able to add the player to BrightAuthor.

  • Perform the Device Setup process again.

  • Verify that you don’t have an active VPN connection. Local File Networking is only supported on the same subnet.

  • Make sure that your firewall software is not blocking connectivity between BrightAuthor and the player.

  • Disable proxy settings in Internet Explorer.

  • Hit the refresh button on the Publish > Local File Network or Manage > Local Network tab.

  • Leave the Publish or Manage tab, then return.

  • Add the player manually using the player IP address.

  • Some antivirus software that includes network components can block Bonjour (e.g., Kaspersky antivirus). Try temporarily disabling that software or add BrightAuthor as a trusted application.

  • Local File Networking is not supported on Windows XP.

  • Local File Networking supports a maximum of 10 players on a local network. Exceeding this recommended number may cause unreliable behavior when publishing to players. For larger deployments, we recommend using the Simple File Network or BrightSign Network publishing methods instead. 

If automatic discovery isn't working, try adding the unit manually. In BrightAuthor, navigate to Publish > Local File Network, click the Add icon under Publish, and enter the IP address of the player.

Screenshot 2024-09-13 at 2.49.15 PM.pngImage Added