Page Comparison

...

You can easily reboot one or more players in BrightAuthor, if they are on the same local network, by adding an Event Handler that responds to a UDP message in the presentation(s) scheduled on the player. This will allow the BrightSign iOS app or any app capable of sending UDP messages to reboot the player with the appropriate message string. This method can be adapted for other trigger mechanisms like Serial Input and GPIO Input, but the advantage of UDP is that it is a network-based communication that does not require additional wiring or cables.

If you are not on the same local network or can't use UDP, see How do I remotely reboot or restart my player?

To Reboot using an Event Handler

...

1. Open your BrightAuthor presentation and select the Edit tab.

2. Select Add Zone as shown in Image 1.

3. Add an Images zone with a suitable name. It will contain the Event Handler that will listen for the reboot requests.

4. Return to the Playlist view and select the zone you just added by opening the drop down or selecting the thumbnail.

5. Select Interactive to make the playlist interactive and the other tab in the Media Library.

6. Drag the Event Handler into the playlist storyboard and select the events tab in the Media Library.

7. Scroll down to find the UDP Input event, then drag and drop it ontotheEventHandler that you just added. The UDP Input Event settings will now appear, as shown in Image 2.

   1. Enter the message that you want to use to trigger the reboot in Specify UDP input. This must be unique so it won't be triggered by any random UDP traffic on your network, otherwise your player will randomly reboot. For this example, use the message Reboot_Me.

   2. The Label will be used in the BrightSign App to identify the command, and by other apps that query the player for available events.

   3. If you want the reboot to appear as a button in the BrightSign iOS App, tick the box.

8. Select the Advanced tab and select (+) Add Command, which adds a command in the list.

   1. Change the Commands drop down to Other

   2. Change the Command Parameters drop down to Reboot.

   3. Select Ok.

9. Save, Upload (if necessary), and Publish your presentation. When you send the UDP message Reboot_Me to the player, it will now reboot. If you have multiple players on the same network subnet and they are all listening on the same UDP port, you can send a UDP message to the subnet's broadcast address (ie, 192.168.1.255 for everything on 192.168.1.x) and all the players that are listening for that command will respond.

...