Expand | ||
---|---|---|
| ||
Enhanced Audio zones provide similar functionality to Audio Only zones, but allow cross-fading between audio files in the playlist: Fading occurs from silence at the beginning of the audio playlist and to silence at the end of the audio playlist, while cross-fading occurs between audio files.
Warning |
---|
ImportantCross-fading will not work between audio tracks if they have different sampling rates (for example, if the first file is sampled at 48kHz and the second is sampled at 44kHz). |
Use the Zone Properties window of an Enhanced Audio zone to edit the following:
Audio Output: Configure audio outputs for the zone.
Note title Note The Analog Stereo and and SPDIF outputs are only available on certain player models.
Analog Stereo: Check this box to enable audio output via the 3.5mm audio connector (or USB Type C connector on the LS423).
HDMI: Check this box to enable audio output via the HDMI® connector.
Pass through: Supplies the un-decoded audio signal through the HDMI connector. Use this option if the zone audio (for example, AC3 Dolby Digital) is being decoded on an external device.
Stereo: Supplies the decoded audio signal through the HDMI connector.
SPDIF: Check this box to enable audio output via SPDIF.
Pass through: Supplies the un-decoded audio signal through the SPDIF connector. Use this option if the zone audio (for example, AC3 Dolby Digital) is being decoded on an external device.
Stereo: Supplies the decoded audio signal through the SPDIF connector.
Audio Mixing: Choose the mixing of the audio output:
Stereo: Outputs both left and right audio signals.
Left: Outputs the left audio signal only.
Right: Outputs the right audio signal only.
Initial Volume: Set the initial volume for audio files (0-100).
Minimum Volume: Sets the minimum volume for audio files (0-100).
Maximum Volume: Sets the maximum volume for audio files (0-100).
Note |
---|
NoteThe Maximum Volume setting will be overridden by other volume settings in a presentation, including the Initial Volume setting for the zone and volume commands attached to events or states. |
Fade(in seconds): Sets the duration of cross-fading between audio files, as well as the fade in and fade out durations at the beginning and ending of a playlist.