Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The XT244 and XT1144 are designed for sustained ambient temperatures between −20°C and 50°C, with transients up to 70°C (at 90% maximum relative humidity, non-condensing). Operating the players above 50°C ambient for prolonged periods may reduce the operational lifetime of the product.

Warning
title

Important

Exposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure. Damage due to such internal condensation is not covered by warranty. If a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power.

...

If the device is being powered by the power supply, the 2A can be shared in any way among the following connectors:

Connector

Maximum Rated Output Currents

USB 2.0 (Type C)

1A

USB 2.0 (Type A)

1.5A

GPIO 3.3V

The nominal current rating for the polyfuse at room temperature is 500mA, although due to the characteristics of the polyfuse, it drops to nominal 330mA at 70C.

HDMI® 5V

70mA

IR blaster output

85mA

PoE Type 1 
Anchor
poe_type_1
poe_type_1

When the player is powered via Type 1 PoE, the total available power is reduced to 12W. This leads to several performance restrictions:

  • Only one CPU core is operational: Processor-intensive applications have slightly reduced performance.

  • Each USB port supplies 100mA of power (one unit load for USB 2.0): This is sufficient for low-power devices such as memory sticks and mice. High-power devices such as hard disks will not operate.

  • A player installed with an internal SSD drive should not

    use HDMI

    use HDMI Input: Both peripherals consume significant power.

title
Note

Note

WiFi is always disabled when a player is powered by PoE. 

...