...
| Note |
|---|
Exposing a cold player to warm air at high relative humidity may cause water to condense inside the player, leading to component failure. Damage due to such internal condensation is not covered by warranty. If a player is cold, allow several hours for it to acclimatize to ambient conditions before applying power. |
Power Adaptor
The XT245, XT1145, and XT2145 are supplied with a 36W (12V3A) power adaptor. The device will use approximately 12W (1A) of power when playing a 4096x2160x60p H.265 (HEVC) source file.
A power budget of 24Watts (or 2A@12V) 24W is available to be shared between peripherals connected to the player. The user should not connect any combination of peripherals that will exceed 2A 24W draw. If more than 2A 24W is drawn, the external power supply may shut down due to over-current conditions. The unit will not be damaged, but it may reboot or not operate properly until the overload is removed.
PoE Type 1
When the player is powered via Type 1 PoE, the total available power is reduced to 12W. This means that each USB port supplies 100mA of power (one unit load for USB 2.0). This is sufficient for low-power devices such as memory sticks and mice. High-power devices such as hard disks will not operate.