XT245, XT1145, XT2145

The BrightSign XT245, XT1145, and XT2145 media players can be used to decode images, audio, and video for digital-signage and kiosk applications. These players dramatically increase HTML performance, with full support for OpenGL. They also support multi-headed output and other applications. In addition to driving audio/video devices, these players can be controlled with various networked and built-in interfaces. These models include a Real Time Clock (RTC) with a supercapacitor that backs up the clock settings when it is power cycled.

Interfaces

XT245

Front	Back

Front	Back
WiFi antenna connector (1 of 2)	MicroSD card slot
Audio out (combo, 3.5mm)	HDMI^® out
IR in/out (3.5 mm)	Service button (SVC)
GPIO	Reset button (Reset)
4 Status LEDs, also visible on the top case	PoE+Gigbit Ethernet
12V@3A locking power connector
WiFi antenna connector (2 of 2)

XT1145

Front	Back

Front	Back
WiFi antenna connector (1 of 2)	MicroSD card slot
Audio out (combo, 3.5mm)	HDMI in
IR in/out (3.5 mm)	HDMI out
Serial (3.5 mm)	USB-A 2.0 port
GPIO	USB-C port
4 Status LEDs, also visible on the top case	Service button (SVC)
12V@3A locking power connector	Reset button (Reset)
WiFi antenna connector (2 of 2)	PoE+Gigbit Ethernet

XT2145

Front	Back

Front	Back
WiFi antenna connector (1 of 2)	MicroSD card slot
Audio out (combo, 3.5 mm)	HDMI in
IR in/out (3.5 mm)	HDMI out (2 outputs)
Serial (3.5 mm)	USB-A 2.0 port
GPIO	USB-C port
4 Status LEDs, also visible on the top case	Service button (SVC)
12V@3A locking power connector	Reset button (Reset)
WiFi antenna connector (2 of 2)	PoE+Gigbit Ethernet