/
XT5 Mounting Procedure
XT5 Mounting Procedure
The XT245, XT1145, and XT2145 can be mounted on a wall using the sealed mounting holes on the front and back. It is recommended that you mount the device using four screws (one for each hole). The screws should have a major diameter between 3.5mm and 4.2mm.
Nails should not be used to mount the device.
, multiple selections available,
Related content
XT245, XT1145, XT2145
XT245, XT1145, XT2145
More like this
XT5 Hardware Interfaces
XT5 Hardware Interfaces
More like this
SSD Installation (XC5, XD5, XT5)
SSD Installation (XC5, XD5, XT5)
More like this
XT244, XT1144
XT244, XT1144
More like this
XT243, XT1143
XT243, XT1143
More like this
XT5 Theory of Operations
XT5 Theory of Operations
More like this