Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Use the Zone Properties window of an Audio Only zone to edit the following:

  • Audio Output: Choose to output audio via HDMI, Analog Stereo, and/or SPDIF. Note that analog and SPDIF outputs are only available on certain models.
    • Pass through: Supplies the un-decoded audio signal through the HDMI/SPDIF connector. Use this option if the zone audio (for example, AC-3 Dolby Digital) is being decoded on an external device.
    • Stereo: Supplies the decoded audio signal through the HDMI/SPDIF connector.
  • Audio Mixing: Choose the mixing of the audio output:
    • Stereo: Outputs both left and right audio signals.
    • Left: Outputs the left audio signal only.
    • Right: Outputs the right audio signal only.
    • Initial Volume: Set the initial volume for audio files (0-100).
  • Minimum Volume: Sets the minimum volume for audio files (0-100).
  • Maximum Volume: Sets the maximum volume for audio files (0-100).

Note

The Maximum Volume setting will be overridden by other volume settings in a presentation, including the Initial Volume setting for the zone and volume commands attached to events or states.

  • No labels