The Audio Only zone allows you to play audio. Use the Zone Properties window of an Audio Only zone to edit the following:
Audio Output: Configure audio outputs for the zone.
Note
The Analog Stereo and and SPDIF outputs are only available on certain player models.
- Analog Stereo: Check this box to enable audio output via the 3.5mm audio connector (or USB Type C connector on the LS423).
- HDMI: Check this box to enable audio output via the HDMI® connector.
- Pass through: Supplies the un-decoded audio signal through the HDMI connector. Use this option if the zone audio (for example, AC3 Dolby Digital) is being decoded on an external device.
- Stereo: Supplies the decoded audio signal through the HDMI connector.
- SPDIF: Check this box to enable audio output via SPDIF.
- Pass through: Supplies the un-decoded audio signal through the SPDIF connector. Use this option if the zone audio (for example, AC3 Dolby Digital) is being decoded on an external device.
- Stereo: Supplies the decoded audio signal through the SPDIF connector.
- Audio Mixing: Choose the mixing of the audio output:
- Stereo: Outputs both left and right audio signals.
- Left: Outputs the left audio signal only.
- Right: Outputs the right audio signal only.
- Initial Volume: Set the initial volume for audio files (0-100).
- Minimum Volume: Sets the minimum volume for audio files (0-100).
- Maximum Volume: Sets the maximum volume for audio files (0-100).
Note
The Maximum Volume setting will be overridden by other volume settings in a presentation, including the Initial Volume setting for the zone and volume commands attached to events or states.
