Local DWS API Endpoints

Remote Snapshot Tab

POST /v1/snapshot/ 

Captures a snapshot of the currently played content on the player

Video Tab

Note that :connector supports only HDMI^® and that :device is the numeric index of the output, which is currently only 0.

GET /v1/video/:connector/output/:device/ 

Retrieves information about the specified video output.

An example of :connector is “hdmi” (without the quotes), and an example of :device is “0”, for example: http://192.168.4.43/api/v1/video/hdmi/output/0/

GET /v1/video/:connector/output/:device/edid/ 

Returns the EDID information from a compatible monitor/television connected to the video output.

An example of :connector is “hdmi” (without the quotes), and an example of :device is “0”, for example: http://192.168.4.43/api/v1/video/hdmi/output/0/edid/

GET /v1/video/:connector/output/:device/power-save/ 

Retrieves the power status of the monitor connected to the player. 

An example of :connector is “hdmi” (without the quotes), and an example of :device is “0”, for example: http://192.168.4.43/api/v1/video/hdmi/output/0/power-save/

PUT /v1/video/:connector/output/:device/power-save/ 

Enables or disables power-save mode on the monitor connected to the player.

Request Body

• enabled bool: Whether the power-save mode on the monitor is enabled or disabled 

GET /v1/video/:connector/output/:device/modes/ 

Returns a list of all available video modes on the specified video output.

An example of :connector is “hdmi” (without the quotes), and an example of :device is “0”, for example: http://192.168.4.43/api/v1/video/hdmi/output/0/modes/

GET /v1/video/:connector/output/:device/mode/ 

Retrieves the current video mode on the specified video output. 

An example of :connector is “hdmi” (without the quotes), and an example of :device is “0”, for example: http://192.168.4.43/api/v1/video/hdmi/output/0/mode/

Example

GET /api/v1/video/hdmi/output/0/mode

PUT /v1/video/:connector/output/:device/mode/ 

Changes the video mode on the player. You should first send a GET request to find the body parameters of this API, but only the parameter below is required (all others are optional):

Request Body

• modeName string: See Supported Video Modes for a list of the possible valid strings for your device

Example

PUT /api/v1/video/hdmi/output/0/mode/{"modeName": "1920x1080x50p"}