Setting Up a Player Without a Setup

Owned by BrightSign TechDocs
Last updated: Sept 24, 2024
1 min read

There are several ways the user can user can set up BrightSign players on-premise, without the need for any additional tools or software:

  • Activation: Enter the Activation or QR code in BrightAuthor:connected. This will automatically download and install the default provisioning setup from B-Deploy.

  • Provisioning: If a provisioning record was configured for the player, it will automatically download it from B-Deploy and install it.

  • On-Device Setup: Enter the setup wizard for On-Device Setup by visiting http://<ip>/setup. This screen will appear immediately if you are not connected to the internet. The On-Device Setup feature is supported on Series 4 (XTx44, XDx34, HDx24, LS424) and Series 3 (XTx43, XDx33, HDx23, LS423) models only.

If you are using a BrightSign WiFi module that is not yet connected to your network, the Access Point setup screen will let you connect your device and use Activation, Provisioning, or On-Device Setup. For more information, see Access Point Mode.