/
HD5 Mounting Procedure

HD5 Mounting Procedure

The HD225 and HD1025 can be mounted on a wall using the sealed mounting holes on the front and back. It is recommended that you mount the device using four screws (one for each hole). The screws should have a major diameter between 3.5mm and 4.2mm. 

Important

Nails should not be used to mount the device.





Related content

HD5 Hardware Interfaces
HD5 Hardware Interfaces
Read with this
HDx22 Mounting Procedure
HDx22 Mounting Procedure
More like this
HDx24 Mounting Procedure
HDx24 Mounting Procedure
More like this
HDx23 Mounting Procedure
HDx23 Mounting Procedure
More like this
LS5 Mounting Procedure
LS5 Mounting Procedure
More like this
XC5 Mounting Procedure
XC5 Mounting Procedure
More like this