/
GPIO
GPIO
- BrightSign TechDocs
- Stephanie Mulqueen
Owned by BrightSign TechDocs
Changes the state of GPIO buttons that are configured for output. See Use GPIO on BrightSign Players for additional information.
On: Turns on the specified GPIO button.
Off: Turns off the specified GPIO button.
Set State: Allows you to turn multiple GPIO buttons on or off. The buttons are specified as bits in an integer value; see the documentation for roControlPort.SetWholeState() for an example.
The "button" numbers are not the same as GPIO "pin" numbers: Some pins act as power supply or ground, so they are not included in the button numbering scheme. See the Hardware Interfaces section of the hardware manual associated with your player model to view a mapping of buttons to pins.
, multiple selections available,
Related content
GPIO Event
GPIO Event
More like this
Presentation Settings
Presentation Settings
Read with this
4.6-GPIO Event
4.6-GPIO Event
More like this
XT5 Hardware Interfaces
XT5 Hardware Interfaces
Read with this
4.6-I/O
4.6-I/O
More like this
XD5 Hardware Interfaces
XD5 Hardware Interfaces
Read with this