Resources

The Resources tab allows you to register BrightAuthor autorun files with your BSNEE instance. The autorun registration process is optional, but you will need to register a new BrightAuthor autorun to publish BrightWall presentations using BSNEE.

Registering a New Autorun

Follow these steps to register a new autorun:

Open

1. Install the new BrightAuthor version on your PC. Ensure that it has been configured for your BSNEE instance.

2. Log in to the BSNEE Admin UI and navigate to the Resources page.

3. Click the  Register Autorun button to open the Register Autorun dialog.

4. Click Choose File to locate the autorun file you wish to register (listed as ~/templates/autoxml.brs in the BrightAuthor installation directory).

5. Enter the Version number for the autorun. This number can be found on line 6 of the autoxml.brs file.

6. Specify the minimum firmware version required for the autorun to play on each model family. We recommend using the current Production version of firmware listed on the Downloads page of the BrightSign website.

Check the Supports BrightWall Presentations box if the BrightAuthor version associated with the autorun supports BrightWall authoring. Checking this box will allow uploading of BrightWall presentations to BSNEE.